Main improvements &
changes in version 3.1 (build 71)
Location of CT8 prefix for Azores has been added
Support the importation of Cabrillo files for the "DME",
"DARC-WAEDC-SSB", "SAC-SSB", "REF-SSB", "EPC-WW-DX" and "RDAC"
contests
Support the new digital modes QPSK-31, QPSK-63, QPSK-125,
DominoEx-4, DominoEx-8, DominoEx-16, JT2, JT4A, JT4B, JT4C, JT4D, JT4E,
JT4F, JT4G, JT64A, WSPR
Support of the FT-736R
Support of the new satellites SO-67 and HO-68
Control of run-time error 52 when selecting the backup function.
Correct the location EX-Kyrgyzstan ITU zones
Slightly lager map of North America, covering the Caribean
Minor improvements in the ADIF importation routine.
Distance in the summary of QSO was wrong if the DXCC-Entity has been
manually changed.
Possibility of using the ENTER key to jump to the next input field
Possibility of automatically assuming a mode when an RS or RST like report
is entered.
New function to automatically generate and upload the MWS data to
MMMonVHF web site.
Improved importation of K1EA's CT files
Main improvements &
changes in version 3.1 (build 64)
Control some eventual errors when running summaries of DXCC and
Prefixes.
The "Worked" and "Confirmed" indicators were mixed in some summaries,
when using the Swedish language plugin.
Update QSL indicators from LoTW ADIF files was not working for JT65x
modes (and possible also for other modes longer than 4 characters)
The quick summary of main squares pending of confirmation was not
working properly.
Location of 8J1 prefixes has been improved (some are from Antarctica and
most from Japan)
Prefixes for stations in Taiwan has been revised
Main improvements & changes
in version 3.1 (build 58)
Support the FT-747GX
Support the awards based on working stations giving letters to complete
a phrase
Support the "Trofeo Alcalá de Henares Cuna de Cervantes" trophy
Main improvements & changes
in version 3.1 (build 56)
Fixed Run-Time error sometimes when selecting a month in the calendar window
Supports the importation of Cabrillo files for the "NACIONAL DE FONIA" and "Nacional
de Sufijos" contests.
Possibility to sort the QSL queue by manager and homecall of the DX stations.
Grid square / Locator Callbook has been updated: 30052 new callsigns
have been added and 24645 records have been updated. The callbook
contains now the Square / Locator of 154648 callsigns.
Reception of DX-Spots from DX-Telenet and LiveMuf has been improved in order to
speed up the process and avoid to take to much CPU time.
Main improvements & changes
in version 3.1 (build 53)
2 new voice files available to configure for the DX-spots warnings (NewDxcc.wav
and NewLocator.wav)
Several links to Google maps (from the locator calculator, the map
window and the VHF database access) where not working when the program was
configured in Spanish.
ADIF importation improved in order to support the multi-line fields
generated by SwissLog
Support the Yaesu FT-890 and Icom IC-7700
The CAT support of the Yaesu FT-1000 has been changed as it was not
working properly.
Support the importation of Cabrillo files for the "IARU-HF", "ARI INTERNATIONAL
DX CONTEST" and "CONCURSO XYL DE ESPAÑA" contests.
Support the connection with the
ARSVCOM
program (version 3.1.31 or later) that allows to control PROSISTEL rotators.
Improves the location of 4O prefixes as Montenegro
The window for selecting the QSO to export to ADIF sometimes was missing
several options (dates, etc.)
Sorting of QSL queue by own callsign:
Sorting was not working in some circumstances
The option was missing in the pop-up menu
Main improvements &
changes in version 3.1 (build 47)
When a separate RX QRG was not registered, it was shown as ".0" in the
logbook browse window.
Improvements in the DDE communication with LiveMUF for receiving
DX-Spots.
It was not possible to change the location of the ARSWIN program.
Close the VQSpot window when running backups and other maintenance
functions.
Support the Yaesu FT-900 and Icom IC-275
Larger Wold map
Run-time error in the Locator calculator utility window
Sorting by "Own callsign" the QSL queue was reset to sorting "by band"
every time the QSL queue window was shown.
Support logging of Digital Voice mode (DV) for D-Star, etc. contacts
Improvements in the ADIF importation
Control of improperly formatted bands
Support of the SRX_STRING tag, used by some contest programs to store
the locator of the DX station.
Main improvements &
changes in version 3.1 (build 43)
Supports the importation of Cabrillo files with the "Expedición HF"
and "Expedición VHF-UHF-Microondas" formats generated by WinURECon.
Frequencies can be registered with higher accuracy (up to 0.1 kHz). Till
know it was 1 kHz.
When sending a DX-Spot to the CAT rig, the frequency of the rig will be
set with a 0.1 kHz accuracy .
After using the calendar window the focus is returned to the associated
date input field.
When sending a DX-Spot to the CAT rig, the mode was not properly set in
the rig in many occasions.
Google maps button was not working if the program was configured in
Spanish.
Google maps button sometimes was shown on a tab other than the Square
tab.
When the program was running in the background, with Vista and some
graphic cards, the computer could be locked after some time.
The sample in the free format address printing was not properly shown on
screen (in Vista)
Updated version of the ADF for the EADX100 award.
Main improvements & changes
in version 3.1 (build 39)
The calendar window was not working properly when Office 2002(XP) or
later was installed in the system
The calendar window has been completely rebuild, in order to get rid of
the many problems caused by MSCAL.OCX control.
Main improvements & changes
in version 3.1 (build 37)
The "Square" tab was showing some grey lines when the number of bands
was restricted in the configuration options.
Rare error 3061 when starting VQSpot from VQLog
Name and Manager were not properly assumed from older QSO made with that
same callsign, but in portable (/P, /3, /M, etc.)
Fixes the "Automation error" when clicking the calendar icon.
Calendar texts are shown according to the language of VQLog.
Minor improvements in the calendar window.
Log browse window now also shows the Satellite and MS specific fields.
Remember that you can hide those columns if you don't need them.
A new option "Hide this column" has been added to the log browse window
menu (right click with the mouse) to hide the unwanted columns. Remember
that you can also change the width of the columns, simply by dragging them (see
FAQ)
Main improvements & changes in version 3.1
(build 18-B)
Includes VQSpot 1.5 fixing the Run-time error
3044 when starting VQSpot.
Main improvements & changes in version 3.1
(build 18)
CAT support of the Yaesu FT-DX9000 has been confirmed to be working OK.
Direct link to Google Maps to show the grid square in:
QSO input window (Square tab)
Map windows (double click a square to get the pop-up menu)
VHF database lookup window
Lat/Lon and Locator calculator
Callbook lookup window
The behaviour of the Set/Unset VQSpot button has been changed, in order
to be better understood by some users.
Dates can be selected from a calendar-like pop-up window.
Possibility to easily check if there are new versions available. Option
in the Help menu and button in the the "About.." window.
Version 2.20 of the MMMonVHF VHF database
Main improvements & changes in version 3.1
(build 11)
Correct background colour of some of the toolbar buttons
Correctly locates the TO3EME callsign in FY (French Guyana)
Direct link in the language configuration window to the language plug-in
download WEB page.
Direct link in the award configuration window to the ADF download WEB
page.
Direct link in the CAT configuration window to the CDF download WEB
page.
Contextual help in the language configuration window was linking to a
wrong page of the help file.
Direct link to VQLog's support page in the Help menu.
DX-spot reception now looks for the locator of both the Spotter and the
DX in the available databases, and warns when it's a new/not confirmed
locator (if configured to do so). Before it was warning only if the comment
of the DX-Spot contained the locator. In order not to receive too many
warnings you are advised to select the option "Only for VHF and up QSO" in
the "Locator" tab of the configuration of connection with DX-Telnet/LiveMUF.
DX-Spot window remembers the last active tab and automatically selects
it automatically when running the program again.
Integration with VQSpot (that will be a part
of the standard setup package of VQLog)
Changes in the CAT support of the Yaesu FT-DX9000
Main improvements & changes in version 3.1
(build 10)
Allow to sort the QSL queue by own callsign
Supports new satellite VO-52
Possibility to sort the list of former QSO shown in the QSO tab by several
criteria (right click on the list for menu)
Control wrongly used <TX_PWR> tag when importing ADIF files generated with
RadioGes
Location of the district of several Italian prefixes improved (IK, IZ, IW, etc.)
Possibility to filter by mode and propagation mode when accessing the log
Updated list of modes to be considered as "digital" by the program.
Name and town, when assumed from former QSO is now always taken from the most
recent QSO where that information is available.
Possibility to automatically assume the QSL manager from the most recent QSO
where this information is available.
The DXCC and Square tabs of the QSO view/modify window sometimes were missing
the tab titles.
Main improvements & changes in version 3.1
(build 8)
Support of the Yaesu FT-950, FT-450, FT-2000 and FT-DX9000
(Help needed from users of this rigs to test it).
Allow to configure up to COM-16 in the CAT configuration.
Allow to print the QSL cards center aligned, good for most modern inkjet and
laser printers.
Retrieve the locator of non-USA stations from the Ham radio RAC Callbook (if
available). Please notice that MOST of these locators are not good.
Possibility to assume the locator from the Callbook lookup window, even when
it's not complete (4 characters only)
Main improvements & changes in version 3.1
(build 4)
Fixed a problem when installing in certain operating systems. (Files HHCTRL.OCX,
etc could not be updated)
Help file has been updated, incorporating the changes made in version 3.1, and
correcting some other minor issues.
Main improvements & changes in version 3.1
(build 3)
Access to the logbook with an award reference containing a hyphen "-" was not
working properly.
Main improvements & changes in version 3.1
(build 2)
Several improvements/controls for running in Vista
Main improvements & changes in version 3.1
Support the Help format required by Windows Vista.
Accept foreign stations portable in EA for the 100 EA CW award, according to the
information from URE.
Add support of new DXCC
Maps have been updated with the new European countries
CAT support of the IC-725, Elecraft K2, Yaesu FT-1000 and others
New modes JT65A, JT65B, JT65C, PSK125, etc.
New types of propagation: LP (long path) & SP (Short path) for the HF bands and
ACS (Aircraft scatter)
ES calculator routine has been improved
Allow to fix the QSO entry tabs, so that the program does not change
automatically to the DXCC tab when working a new one.
Support the format of the file downloaded from eQSL.cc inbox in order to update
the QSL indicators.
Support longer descriptive text in the awards references.
Show the details of the developer of the ADF
In the summaries of squares and awards containing more than one band, show the
band of the first QSO made.
MWS, “Most Wanted Squares” del VHF-DX-Gruppe DL-West.
Allow to generate files in MWD format
Support 50 MHz band
Summaries of CQ Zones and WAC continents are much faster (about 4 times
faster). (It's necessary to run once the function "File-Maintenance-Repair/Compact
the Database". It's only necessary to do it once after having updated to
version 3.1, but never again)
Summary of ITU zones
When entering a QSO, assume the Spanish province based on the locator,
if the TPEA award is configured.
Access to the logbook by:
QSL manager
CQ Zone
ITU Zone
Continent
Any of the user defined awards (For the TPEA it's necessary to run once
the function "File-Maintenance-Repair/Compact the Database". It's only
necessary to do it once after having updated to version 3.1, but never again)
Direct access to the logbook access menu using an icon in the toolbar
In the logbook access windows:
Allow to sort the list of QSO by several criteria
Allow to print the list of QSO, or save it in a file, or export it
to an ADIF file.
Support the changes made in URELOC 2.0
QSL-VHF contest has no FM mode
País del Cava en UHF contest
Costa del Sol V-U-SHF Contest
Warning if a QSO with possibly wrongly formatted portable callsign (/P0,
/P1, etc.) is entered
Retrieve the locator and type of licence in the QRZ.COM on-line lookup.
Allow to filter by digital modes (in general) the summaries of QSO,
locators, awards, etc
Allow to filter by WARC bands and "All HF" (10 a 160m) the summaries of
QSO, awards, etc
Support the new satellite mode designation (V/U, U/S, L/X, etc)
Allow to change the program used as viewer of summaries "on screen".
Allow to configure the main windows title text
Accept parameters /L and /C in the command line to force the program to
use a certain log or configuration file.
Summary or not worked squares within a range.
Improvements to the Cabrillo format importation
Import references of the user defined awards, (WAS, IOTA, TPEA, DME,
etc.), if they are defined using and ADF file
Support the formats generated by the WinURECon
Allow to add future formats without having to change the code of the
program.
Fixed problems:
CDF file for the IC-736 was wrong
Several problems in the FT-990 CAT support
Spots not matching the filtering criteria could make appear the DX-Spots
window and sound the warning, as if new spots would have arrived.
Control errors when opening a .CFG file, during the importation from
URECON.
The summary of propagation openings could show wrong results
depending on the order in which the QSO had been entered.
Allow to break the importation of ASCII, ADIF & Cabrillo files if
they contain dates with a wrong format.
Sporadic errors of "incorrect use of NULL" when printing QSL/Labels
Avoid that WAZ summaries show wrong zones (<1 or >40) that could be
stored in the DB.
DX-Spots of de 10 GHz and higher where not shown.
Run-time error when using the right button of the mouse after
deleting the list of DX-Spots.
If RX and TX frequencies are the same, only one will be printed on
the QSL.
Quick summary of DXCC pending of confirmation was not working
properly.
Allow importation of ADIF files with references of more more than 10
user defined awards.
Control errors in the printer selection, during program start up.
Correct assignation of certain prefixes 4N, YU, YT y YZ to Serbia and
Montenegro
Error 5 when making a summary of initials containing more than 9999
initials.
Error in summaries, etc. after having made an importation from a
network drive, if that network drive was been disconnected without
restarting the program.
The "power" field was not properly exported to ADIF if it contained
non-numeric characters (i.e.. “1 KW”)
KingWin importation was failing if the path to the DBF file
contained blanks.
Improvements in the ADIF importation of the USACA award.
When accessing the summaries window, if the selected band did not
match any of the available and the user didn't have 144 MHz selected It
was showing an “error 383, Text property is read only”
Main improvements & changes in version 3.0B
New rigs supported in CAT
interface
New Award Definition Files included
Faster loading of the windows showing the list of award references for ADF
supported awards.
Don't consider DX-spots like JT65* y FSK441*
As far as possible, avoid showing communication errors with Kenwood rigs.
Callbook on-line access via internet to QRZ.COM for subscribers of QRZ
Premium Services
Fixed bugs:
MHz y kHz abbreviations corrected
Control whether DIRECC.MDB is marked as read-only
Control null fields in DIRECC.MDB when retrieving them
Remove null fields from DIRECC.MDB when reparing the database
Control wrong date formats that could give errors when naming the path
for the backups.
Control infinite loops in the DXCC calculation routine (4UIWB case)
Activity DX contest routine was not calculating the points under some
circumstances.
Error '383' when modifying a QSO that didn't have a continent assigned
(As result of importing data, for instance)
Error 383 o 386 when accesing the window of summaries
Support null values in the input formats of ADF.
Control errors when opening the HTML template.
Control the range of possible values of CQ and ITU zones when
importing from ADIF.
Importation from DL1EFJ's VHF-Contest was not working
Don't allow to enable CAT unless there is some rig-set active.
Location of HF0QF and HF0POL (South Shetland) corrected
Main improvements & changes in version 3.0A
Improvements in CAT support
New rigs IC-821, FT-1000MP, FT-1000MP Mark-V, FT-857 are
supported
Mapping of digital modes sent by VQLog to the rig
Force recovery of rig status when deleting / undoing QSO entry.
Fixed bugs:
Run time Error 381 when accessing some QSO that didn't have a DXCC
code assigned.
File generated for LoTW was the same than for eQSL.cc
Run-time error 3075 in the summary of DXCC entities pending of
confirmation.
“Error 52, Bad Filename or number” when opening the dialog for QSL
image file selection.
Error 3170 when browsing the logbook is controlled in order to give a
more detailed warning.
Main improvements & changes in version 3.0
Program uses Jet 4.0 (DAO 3.6) database engine, what makes it compatible
with MS-Access 2000
New satellite modes U-S2, L1-S2 and L2-S2 supported
New satellite SO-50 supported
New transmission modes JT6M and PSK63 supported
New bands of 73 KHz and 5 MHz (60m) supported
Improvementes in ADIF importation
Control of wrong dates and too long fields
Serial number generated with C2A was not imported
Support the files generated with the program ATALANTA
Improvements in the importation from CT that sometimes was not working on
Windows 2000 and XP
Length of input fields for Name, Town and Remarks adapts to the widht of
the window
Possibility to print the QSL data alone, without printing a background
image (for pre-printed QSLs)
Improvements in the summaries of QSOs (on screen, file and WEB page)
A column showing the mode, unless an specific mode has been selected
A column showing the band, unless an specific band has been
selected)
A column showing the propagation mode, unless an specific mode
has been selected)
Length of remarks column is adjusted according to the longer
remarks.
In the summaries of QSOs and propagation opennings, all QSO are taken into
account, even if locator is not available
Possibility to choose the sort order (ascending/descending) in the
summaries of QSOs, initial QSOs, EME initials and squares.
When entering or modifying QSOs you can select the own callsign and
locator from a dropdown list
Improved detection of locators in the comments of DX spots
New option for filtering DX spots
Only for the bands you are active in
Only if the DX or spotter are at closer to your than the given
distance.
Posibility to use LiveMuf for receiving DX-Spots
New contextual menus in the DX-Spots window
Search other QSOs with the DXCC of the DX or the spotter
Send the DX-spot to the Entry window
Show spot on a map
UTC time is calculated according to the time zone configuration of
Windows. This means:
Summer/Winter time adjusts are made automatically
Time zones with differences of half hours or so are supported (For
instance time zone of India which is GMT+5:30)
Allow to enter CQ and TEST in the callsign field without assigning the QSO
to a DXCC. (In order to allow to register calls and test transmissions as
required by some administrations)
Show the long path in the "available data" window
Possibitily to update the QSL-send/QSL-Received indicators from
an ADIF file (For eQSL.cc, LoTW, etc)
ADIF files generated now include the CQ zone, ITU zone and continent
Letter size paper supported, if configured in printer options
Input length for award references is now 20 characters
Support the use of Award Definition Files (ADF). This means:
References can be selected from a list
Input format can be controlled
It's possible to make summaries of pending references
New-DXCC warnings are now independent for phone and CW, in HF bands
In quick summaries of DXCC it's possible to select the mode
Allow to use wildcards (*,?,#) when accessing by callsign
Possibility to make summaries of awards and locators in chart format, with
a column by band Additionally if "all mode" is selected separate
columns for phone, CW and other are also included
When changing the DXCC entity, the continent, CQ zone and ITU zone are
adjusted accordingly
When entering QSOs, possibility to show automatically a table of bands in
which the locator has been worked before
When entering QSOs, possibility to show automatically a table of bands and
modes in which the DXCC has been worked before
Possibility to assume the award references from former QSOs with that
station
Possiblity to print QSL or QSL labels for SWL's
Possibilty to print several QSOs on the same QSL or QSL label
144 MHz activity DX contest adapted to the new rules of year 2003
Interface with rigs that support remote control (CAT)
Built-in database of locators updated:
17706 new callsings
19657 callsigns updated
Stations signing as /R are considered as "rover stations"
Improvements/changes in version 2.3B
New modes of propagation supported. LOS (Line of Sight), TRS (Tropo scatter), TRD
(Tropo ducting)
Wrong DXCC assignation of KH5 prefixes
Error "3061 - Too few parameters" appearing sporadically in
summaries and statistics.
Under certain rare circumstances the program ended and afterwards the
log is empty.
Improvements/changes in version 2.3a
Faster execution (specially noticeable in P-II and older computers)
Improvements in URECON importation (null RSTs and TPEA)
A wrong QSO number was shown after editing a former QSO (It was properly
kept in the log, anyway)
It was not possible to reset the end time of the QSO when updating a
record.
Improvements/changes in version 2.3
Callbook CD support improved
QRZ.COM callbook support
Buckmaster's HamCall support
Possibility to have the callbook CD copied in the hard disk
Assume automatically the US county if the award
"USACA" is configured
Assume automatically the 10-10 number if the award
"10-10" is configured
Improvements in the print format of the addresses
Frequencies are shown complete (not removing the trailing zeros)
Possibility to send E-Mails simply clicking on the E-Mail address
Possibility to navigate to the web pages just clicking on the URL
ADIF importation improved
QSL sent/received indicators
Importation of WAS, US counties & VE provinces
Support of Tag CONTEST_ID
Support of the non-standard tag LOCATOR (used by
Turbolog)
Importation of files in Cabrillo format
Possibility to assume several values by default when importing Cabrillo, ADIF, ASCII, TacLog, CT
and URELOC files
Warning is shown when trying to enter a QSO in a frequency outside any
amateur band
Summary of subsquares
Possibility to use a "transparent label" with the QSO data when
printing QSLs.
Possibility to print 4 QSLs on a sheet of paper (landscape orientation)
New SATellite-specific input fields (Satellite name and mode)
New meteor-scatter specific input fields (Nr.pings & bursts, max
length, etc..)
New EME specific input fields to allow to control EME initials.
Possibility to print Satellite and MS specific fields on the QSL
Possibility to sort the summaries of QSOs, squares and initials by several
criteria (Date/Time, Callsign, Locator or Distance)
Statistics of QSOs by satellite.
Statistics of QSOs by mode
Possibility to define equivalent callsigns
New summary of EME initials
Longer text for transmission modes
New function to restore the default value of the main window
Number of posible awards increased up to 30
Possibility to make summaries and logbook listing based on the
own-callsigns
New buttons in the summaries windows to make easier to selection of the
least restrictive options
Possibility to generate an ADIF file with the summary of QSOs
New function to select the QSOs to be included in an ADIF file
Possibility to use the ITU designation of the modes
Adjust the size of the maps windows to the size of the map
Draw QSOs on the maps according to the max.circle line (real path)
Width of columns of the browse window is kept into the configuration
Possibility to leave a window (browse-like) open that shows the last QSOs
while they are being entered
Possibility to show QSOs on the map even if the locator of the other
station is not available
Possibility to set the QSL-Sent indicator to "N", meaning
"No QSL exchange" for that QSOs
Improvements in the printing of QSLs and QSL labels
You can select "only QSOs for which the QSL hasn't been received
yet"
You can select "Don't sent QSLs to the stations already
confirmed"
You can select "Don't sent QSLs to the stations to which a QSL
has been already sent before"
Network support. Possibility to run VQLog from a network shared device and
use the same databases from several computers simultaneusly
Maps and graphics are generated in PNG format for web-pages (much smaller
size than BMP)
Possibility to create and use independent log files
Possibility to create and use independent configuration files
Internal database of stations/locators updated
27733 new callsigns
30358 locators checked and updated
Other minor bug fixes and improvements
Some deleted entities were no shown in the dropdown list box
Blenheim Reef
Geyser Reef
Abu Ail Is.
Posible errors when opening the language pluging file are now controlled
Warn if some file is maked as read-only, when starting the program
Error control routine improved, when starting the program
When a QSO was marked with "QSL received via..." directly from
the logbook access window or the browse window, the locator and DXCC tables
where not updated
Error of date format when entering a few callsigns
/M /P, etc. callsigns where not found when accessing the callbook
Zeros where not slashed when printing the logbook
Callsigns with wrong charaters are not allowed
An error was shown when loading the DX-Spots window if there was some
modal window open
DDE queue is clean inmediatly to avoid locks of
DXTelnet
When accessing the logbook and pressing one of the "F" keys
assigned to "mark with QSL..." without having any QSO in the list,
an out of range error was shown
Background of labels is always shown white, independently of the colours
configured for the windows desktop.
Division by zero when printing address labels (1 row of labels and
"don't print the last row" ticked)
Control errors if log empty when browsing and editing last QSO
Transparent background of icons on buttons.
When callbook access was active and moving from the callsign to the
RST-sent field this last one was not maked (selected) automatically
Allow names with apostrophes in the addres book
Removed Activity DX contest on 432 MHz
Generate a file OTHER_CALLSIGNS when exporting to ADIF by callsigns, for
holding the QSOs not having the own-callsign field filled.
Improvements/changes in version 2.2
Radio Amateur Call Book CD support
Access to the logbook by text in remarks
Access to the logbook by main square (2 letters)
Access to the logbook by DXCC entity
Posibility of making summaries of main squares (2 letters)
Posibility of registering the Azimuth and elevation of the antenna
Posibility of comunicating with ARSWIN to turn the antenna and register
the Azimuth/Elevation automatically
Pop-up menus using the right button of the mouse
On the list of QSOs when accessing the logbook
When browsing the logbook
In the "QSOs" tab
In the QSL queue
When accessing the address-book
When accessing the VHF Database
On the callsigns in the list of received DX-spots
Posibility of selecting several rows at the same time in the different
lists:
On the list of QSOs when accessing the logbook
When browsing the logbook
In the "QSOs" tab
In the QSL queue
When accessing the VHF Database
Hot keys for changing the QSL sent/received indicators when accessing the
logbook and browsing the logbook.
Posibility of making summaries of QSOs including QSOs not complete.
Indication, using different colors, of the QSOs not complete and SWLs.
Latest received DX-spots are marked with a different background color.
Posibility of selecting the format of dates
Posibility of defining a list of the rigs/antennas and use it when
entering QSOs in the field "Rig".
Posibility of defining a list with the powers most often used and use it
when entering QSOs in the field "Power"."
Posibility of restricting the list of transmission modes and types of
propagation to the most often used.
Posibility of registering the end time of the QSO automatically.
Automatic generation of WEB pages with the summaries. maps and
statistics.
Posibility of using slashed ceros (Ø) in callsigns and
locators
Generation of maps of squares for the VUCC award
Posibility of reducing the number of the input fields
Summary of the 100 EA CW award
Posibility of printing the own callsign on the QSLs and QSL labels.
New functions for generating ADIF files.
Complete QSOs in a single file
Complete QSOs, one file for each callsign used
Small files to be uploaded to eQSL.cc
The routine for searching locators has been improved in order to assume
always the most recent information.
Support "E" as indicator of electronic QSL sent/received.
6 meter band now covers up to 54 MHz in order to match the frequencies
assigned in USA.
New modes FSK, PSK4 and WSJT supported
Control of null fields when importing from Radiolog
Importation of the RG23 program
Support the importation of version 4.1a of Log-It
ADIF files importation improved
EasyLog importation improved
Ham importation improved
Importation of satellite modes from FastLog has been improved
Log 4.0 importation improved
URELIB importation improved
Importation of ASCII files improved
Posibility of importing the serial number of QSOs from TacLog
Identification of U.K. novice callsigns improved.
Location of some stations improved (KG4, EM1HO...)
South Africa call areas updated
Internal database of locators has been updated
Locator of 9420 stations has been revised and updated
9915 new stations have been added
DX-spots with callsigns like "QRV, AURORA, MUF, etc" are not
intepreted as new/not confirmed DXCC entities
After entering a QSO the program was always giving the focus to the
"Date" field, instead of giving it to the first field defined in
the input sequence.
Rare "Run-time Error 3022" in the summaries of awards.
Improvements/changes in version 2.1c
New type of progagation "RS" (Rain-Scatter)
Free importation from ASCII files
Configurable option for showing distances in Miles
Blinking indication in the QSOs tab when the station has been worked
before.
Reception and processing of DX-Spots from DX-Cluster, etc. using DX-Telnet
Show "New/not confirmed DXCC" warning in the QSO-update window.
Don't go to the begining of the list when deleting a QSL from the queue
Posibility to use external "plug-in" files with texts of the
program in other languages
Wider frequency margin of the 13 Cm. band in order to cover frequencies
allocated in Australia
List the QSOs with a square when double clicking on it on the map
Posibility to automatically set the "QSL-Sent" indicator when
printing the QSL.
Printing of maps fitting the size of the sheet of paper.
New modes MFSK y MT63
Importation from LogPlus 3.64
Importation from RadioLog
New band 136 KHz.
Posibility to print complete QSL cards. Not just labels.
Improvements in the importation from KingWin
Improvements in the importation from FastLog
Improvements in the importation from SwissLog
Adapt importation from Radio Gest in order to support version 40
Improved the location of stations in entities of the former Soviet Union
Support decimal comma when importing from ADIF and ASCII files
Support fields "SAT_MODE" and "SAT_NAME" in the importation of ADIF.
Direct link to the WEB page for updating DL8EBW's VHF database.
Error when importing QSOs without band from URELIB
RST-received and sent were wrongly imported from Log 4.0
Importation from RadioGes was importing improperly callsigns containing a
slash (/P, /MM, etc)
Solved a problem in the importation/exportation of the QSL-Manager in ADIF
files
Wrong location of some callsigns
Error when printing QSL from the QSO-access window.
Avoid that /MM stations were giving "unknown DXCC" error in the
summaries
The QSO-complete indicator was always shown in Spanish when browsing the
logbook
End-Time of the QSO sometimes appear as "1/1/2000 00:00" (Is
necessary to run "File - Repair/Compact the database" in order to
correct it)
Improvements/changes in version 2.1b
Faster startup
Show locator and distance for the location of the mouse pointer on the
maps.
Problems importing callsigns with "/P" from HAM-III
4K3 & 4K4 callsigns where not recognised
Some problems when printing only one QSL-label per sheet.
Some problems importing from Log-It
Problems importing IOTA & WAS awards froml EasyLog
Problem importing ADIF files with only one record and without header
Assume type of propagation "AUR" for reports 59A when importing
from FastLog and EasyLog
Importation from HyperLog 4.10
QRG for QSOs on 80 an 160 m. was wrongly printed on the QSL label.
New mode PACTOR
Bypass the URELOC 1.8 problem that stores dates like 1900 instead of 2000,
in order to correct the date during the importation.
Wrong modes when importing from TacLog.
Importation from DasLog
Solved the "Error 3061: pocos parametros se esperaba 1"
when importing from URELOC 1.8
Importation from MFJ-EasyDX
Importation from URELIB 3.x
New DXCC entities 4W y TX0 supported
Problems importing from new version of CT
New prefix VP6 for Pitcairn
Support awards DOK & DIG when importing from Log 4.0
Wrong location of stations RK9 y RK2
Posibility to Zoom the maps.
Detailed maps of Africa & South America.
Problems registering QSOs with 7O stations (Yemen)
Error 383: when entering certain callsigns not correctly supported in the
DXCC table.
Posibility to draw equistant lines on the maps.
Importation from Super WinLog
Error "Wrong Day/Month received in function CDatelnt" when
importing from C-Log.
Importation from TacLog 1.99
Prefix T8 assigned to Belau, instead of KC6
Summary of squares for VUCC award
Posibility to backup the configuration file
Improvements in the importation from SwissLog
Improvements in the importation from Log-EQF
If start-time and end-time are the same don't print the end-time on QSLs.
When printing the own-locator on the QSL, the text "My Loc:" was
nos printed
Posibility to print PSE/TNX QSL on the QSL labels
Posibility to print the QSL manager on the QSL labels
Improvements/changes in version 2.1a
New mode ARQ
Importation from Log VRR
Importation from OH1AA's log
Summaries of awards were sent to a file called "CommonDialog1.filename"
instead of to the selected file-name.
Importation from SwissLog failing with QSOs of year 2000
When working a new DXCC on EME it was not possible to change to other
folders (Distance, Awards....)
Improper versions of some DLL's were installed by the SETUP of version 2.1
Improvements/changes in version 2.1
Error "File not found" importing from Log-EQF
Treatment of frequencies 1K3, 2K3, etc. from FastLog
Several improvements in the importation from FastLog
Run-time errors when cancelling a print
Access to VQLog's WEB site and the community of users of VQLog on Internet
Problems in the importation from EasyLog
Configuration data is kept in a separate file, so that the information is
not lost when upgrading to a new version.
Makes sure that the QSL labels are always printed in portrait mode
Longer RST fields (8 characters)
Error "Invalid use of null" when changing some imported records.
Importation froml VisuaLog 1.2 by EA7EYX
Wrong location of 4U50VIC
New treatment of DXCC entities
Posibility of assigning a QSO to a certain DXCC entity (even
"deleted" ones), CQ zone, ITU zone & continent
Support of user-defined awards (for instance WAS, IOTA, TPEA, DIE...)
New QSO fields: Power, Rig & QSL-manager
Several improvements in the back-up option.
Importation from KingWin
New allocation of prefixes in Canada
Importation from HAM-III 2.1b
New mode AMTOR
Problem when importing TacLog files with "Own locator" longer
than 6 characters
Indication of the number of square/DXCC when working a new-one
Expsrv.dll added to the SETUP because of requirements of the new
VBAJet32.dll
Improvements/changes in patch "h" (VQLog 2.0h)
New version 1.60 of the DL8EBW's VHF database
"Run-Time" error when updating DL8EBW's VHF database
Importation of G4HBA's personal log
Changes in the importaion of G4IGO's personal log
The program assumed the date 31-12-1899 in the QSL labels
Improvements/changes in patch "g" (VQLog 2.0g)
Detailed map of North America, Asia & Australia
Posibility to customize the input sequence of the fields
Importation from Station Master
Importation from Log 4.0
Importation from LogPlus 4.08a
Importation from EA-Log V6.3a
Importation from URECON 3.1
Importation from CT
Importation from Log-EQF V.9
Importation from personal log of G4IGO
Posibility to automatically assume the time of the start of QSO based on
the end-time of the former one.
Posibility to print the logbook by bands.
New type of propagation "back scatter"
(BS) supported
Posibility to make quick summaries of squares/DXCC of all bands/HF-No
WARC.
Problems importing from SwissLog
Problems with some DXCC prefixes (HM, VR, ZG, UE3D, etc)
VP8SSI was wrongly located
Problem importing contacts made via satellite from
FastLog.
Problems in some summaries of QSOs on 12, 17 & 30 m:
After importations the number of next QSO was not updated.
Improvements/changes in patch "f" (VQLog 2.0f)
Importation from TacLog 1.98
Problems with dates when importing ADIF files
Posibility to customize the number of QSOs per page when printing the logbook.
New prefix 2C for stations from Wales (GW)
New prefix 2U for GU stations.
Cursos sometimes was not jumping automatically from the "Callsign" to the
"Report sent" field. Tab key had to be pressed twice.
After recomputing the numbers of records, the value was not updated int the QSO-entry
window.
Importation froml UKWTest 4.07
Support of DL8EBW's VHF database.
Summary of MWS duplicated some squares (KP18, KP28...)
Run-Time error if a callsging was typed with quotes on it.
Name of DXCC entities with character "&" where improperly shown.
Improvements/changes in patch "e" (VQLog 2.0e)
New function "Edit last QSO"
Posibility to automatically assume some fields from available data.
Importation froml VHF-contest V2.3 by DL1EFJ
Importation from EasyLog 4.52
Texts in Catalan have been revised.
If the the program was closed when being minimized, then the next time it was run it
stayed minimized.
Import from URELOC 1.8
Import from URELIB 2.1
Problem importing contacts from EA6VQLog 1.5 having some fields null.
Support of american version of Windows, having default date mask like MM/DD/YY
Problems importing frequencies from ADIF files
Don't allow to select user labels (QSLs) if this hasn't been defined
New prefix 2S for Scotish stations (GM)
Improvements/changes in patch "d" (VQLog 2.0d)
When changing date at 24:00h and having the PC time set to non-UTC, the date was also
changed on screen
Import from SwissLog 3.D3
"Run-Time Error 3131" when importing from URELOC 1.7
Errors accessing the logbook by record number.
Improvements/changes in patch "c" (VQLog 2.0c)
"RUNTIME ERROR 381 "SUBSCRIPT OUT OF RANGE" when double clicking on an
empty list of QSOs when accessing the logbook.
Import / Export ADIF files
Problem importing form DL1EFJ's log with records with null dates.
Automatically adapt entered callsigns, avoiding the entry of "-" y
"\" characters.
Summaries, statistics, logbook listing and QSL-labels printing have been adapted in
order to assume the default locator (from the station data) when the "My
locator" field hasn't been entered in the QSO.
Some minor problems in the distance calculation in some summaries and statistics have
been fixed.
Improvements/changes in patch "b" (VQLog 2.0b)
Problems importing QSOs and addreses from EA6VQLog 1.5 with "null" records
When typing year 0 to 9, the program assumed year 200 to 209 (instead of 2000 to 2009,
as it does now)
Posibility to define your time-zone in the "program options"
Add your comment to this page.
(Important: Only comments directly related to the content of this page will be accepted. Other types of comments and complains can be E-Mailed to the webmaster.)